HP PUMPING EQUIPMENT

BE provides pressure pumping equipment such as cementing unit (manual or automated), frac pump and stimulation pump.

Our challenge is to ensure the best results, in spite of adversities we face to, from the diverse types of ground and reservoir formations characteristics, to the operating conditions.

BE acts with agility, resourcefulness and technical expertise. Securing them, such as the producing areas and improving stimulation performances safely and efficiently.

PRODUCTS AND SERVICES

Sizes 2’’, 3’’, 4’’

Type STD/H2S

Connections Weco Unions, Fig. 1002, 1502, 2202

BE builds manifolds for all the well service operations:

Cementing

Coil tubing

Snubbing

Gravel packing

Frac

Frac flowback

Squeezing

The manifolds are configured and built as per client’s specifications and requirements.

Size 2’’, 3’’, 4’’

Pressure (Working) 5000 PSI, 10 000 PSI, 15 000 PSI

Valves API 6A plug valves

Actuation Manual, Pneumatic, Hydraulic

Choke Valves API 6A chokes

Inlet/Outlet Connections 2’’/3’’/4’’ WECO 1502 Female/Male

Twin pump trailer 

Chassis Trailer

Drive Engine (2 pcs.) Detroit Diesel, Caterpillar, Deutz

Transmission (2 pcs.) Allison Series

Triplex Pumps (2 pcs.) MSI Hybrid (600 HP), SPM or Griffin

Maximum pressure * 77 MPa (11000 PSI)

Maximum flow rate * 3400 l/min (880 gpm)

Displacement tank 3.2 cu.m. (20 bbl)


Twin pump skid

Chassis Skid

Drive Engine (2 pcs.) Detroit Diesel, Caterpillar, Deutz

Transmission (2 pcs.) Allison Series

Triplex Pumps (2 pcs.) MSI Hybrid (600 HP), SPM or Griffin

Maximum pressure * 77 MPa (11000 PSI)

Maximum flow rate * 3400 l/min (880 gpm)

Displacement tank 3.2 cu.m. (20 bbl)

Mixing tank 2.0 cu.m. (12.5 bbl)

Slurry density 1…2,7 tons/cu.m


Twin pump truck

Chassis MAN, Scania, Mercedes etc.

Driver Engine Detroit Diesel, Caterpilar, Deutz

Transmission Allison series

Triplex Pumps MSI Hybrid (600 HP), SPM or Griffin

Maximum pressure * 77 MPa (11 000PSI)

Maximum flow rate * 3400 l/min (880 gpm)

Displacement tank 1…2,7 tons/cu.m.


Single pump truck

Chassis 4×6 or 6×6 MAN, Scania, Mercedes etc.

Drive Engine Detroit Diesel, Caterpillar, Deutz

Transmission Allison Series

Triplex Pumps MSI Hybrid (600 HP), SPM or Griffin

Maximum pressure * 77 MPa (11000 PSI)

Maximum flow rate * 1280 l/min (880 gpm)

Displacement tank 3.2 cu.m. (20 bbl)

Mixing tank 2.0 cu.m. (12.5 bbl)

Slurry density 1…2,7 tons/cu.m


Batch Mixing trailer, Rounded tanks SINGLE:

Chassis Trailer

Drive Engine Detroit Diesel, Caterpillar

Batch Tank Single

Volume 8 cu.m. (50 bbl)

Mixing Head Jet type

Agitator Hydraulic Single

Slurry density 1…2,7 tons/cu.m

 


Batch Mixing trailer, Rounded tanks DOUBLE:

Chassis Trailer

Drive Engine Detroit Diesel, Caterpillar

Batch Tank Double

Volume 8 cu.m. (50 bbl) + 8 cu.m. (50 bbl)

Mixing Head Jet type

Agitator Hydraulic Single

Slurry density 1…2,7 tons/cu.m

 


Batch Mixing trailer, Squared tanks SINGLE or DOUBLE:

Chassis Trailer

Drive Engine Detroit Diesel, Caterpillar

Batch Tank Single or Double

Volume 10 cu.m. Or 10 cu.m. + 10 cu.m.

Mixing Head Jet type.

Agitator Single or Double

Slurry density 1…2,7 tons/cu.m


Batch Mixing skid:

Chassis Skid

Drive Engine Detroit Diesel, Caterpillar

Batch Tank Single or Double

Volume 10 cu.m. Or 10 cu.m. + 10 cu.m.

Mixing Head Jet type.

Agitator Single or Double

Slurry density 1…2,7 tons/cu.m


Cement compressor unit:

Drive Engine Detroit Diesel, Caterpillar, Deutz

Flow Rate 750 cu.m./h.

Max. Pressure 2,5 MPa (35 PSI)

Compressor Airflux, Gardner Denver, Betico, CVS

Standard output 440 cu.ft.min @ 35 PSI

Various configurations and sizes are available.
Units are built as per client’s requirements.


Cement silo:

Cement Silo volume from 10 cu.m. to 43 cu.m

Silos are designed in accordance with ASME “U” as pressure vessels and fully tested.

Twin pump trailer:

Chassis Trailer

Drive Engine Detroit Diesel Engine Serie S60

Transmission Allison 4700 Series

Auxiliary Transmission Eaton Fuller AT 1202

Triplex Pumps; NOV JWS 340;

Plunger Size 2-3/4″ & 4; Stroke Length 5″

Plunger Pump Gear Reducer Ratio 4.38/1

Maximum pressure @ 100RPM * 77 MPa (10000 PSI)

Maximum Flow-rate @ 100RPM * 39GPM

Displacement tank 3.2 cu.m. (20 bbl)


Single pump truck:

Chassis MAN, Scania, Mercedes

Drive Engine (2 pcs.) Detroit Diesel, Caterpillar, Deutz

Transmission (2 pcs.) Allison 4700 Series

Triplex Pumps (2 pcs.) MSI Hybrid (600 HP)

Maximum pressure * 77 MPa (11000 PSI)

Maximum flow rate * 3400 l/min (880 gpm)

Displacement tank 3.2 cu.m. (20 bbl)


Single pump SKID:

Chassis Skid

Drive Engine (2 pcs.) Detroit Diesel, Caterpillar, Deutz

Transmission (2 pcs.) Allison 4700 Series

Triplex Pumps (2 pcs.) MSI Hybrid (600 HP)

Maximum pressure * 77 MPa (11000 PSI)

Maximum flow rate * 3400 l/min (880 gpm)

Displacement tank 3.2 cu.m. (20 bbl)


Transfer c-pump unit:

Base Skid

Drive Engine Deutz (Detroit Diesel, Caterpillar)

Engine Power 68 BHP

Clutch Manual

C-Pump Gardner Denver 6×5 (or other)

Other sizes of pumps and engines are available to match client’s specifications. Units are built as per client’s requirements. These transfer C-pump units can be used to pump a variety of fluids (water, diesel, crude oil, etc.) including acid solutions (special internal coating and Teflon lines valves).

Frac Pumper: Trailer Mounted Frac Pumper with 3000HP Triplex Pump, 2500HP Diesel Engine, centrifugal booster pump and control system. Built in the UAE for weather and terrains conditions of the Middle East.

Based on years of experience and research on customer needs in the oil/gas industry, Bearn Engineering has successfully developed flowline products suitable for both standard and sour services, including swivel joint, plug valve, integral pup joint, integral fitting, safety valve, check valve, choke valve, hose loop and reel swivel.
Maximum pressure is up to 20,000psi.
Each flowline product is conducted strict quality control and test, meeting international standards including ASTM/ASME. Each product has one only traceable number for quality management of whole life cycle. Tool kit and repair kit are available to suit each product for easy maintenance.
Besides standard products, we can also provide customized service to meet various customer needs.
HP Treating Iron products: Pressure Relief Valves, Plug Valves, Choke Valves, Check Valves, Tees, x-overs, laterals, elbows, Pup Joints, Swivel Joints, Loops.


Pressure Relief Valve:

Sizes 2’’, 3’’

Type STD/H2S

Connections Weco Unions Fig. 1502

Design Seat, Ball, Spring

The pressure relief valve body is forged. The relief is created by a conical seat/ball/spring assembly. The spring effect is generated using a pile of conical spring washers. The relief pressure is adjusted by compressing the pile of spring washers with the hexagonal nut on top of the valve.
The reset effect is automatic.
This type of pressure relief valve is commonly called “Pop Off” valve.


Plug Valves:

Sizes 2’’, 3’’

Type STD/H2S

Connections Weco Unions Fig. 1502


Choke Valves:

Sizes 2’’, 3’’

Type STD/H2S

Connections Weco Unions Fig. 1502

Design Needle and Seat, Tungsten carbide

The chokes are equipped with an orifice size indicator enabling the operator to adjust precisely the opening.
To extend the life of the choke body a choke saver is mounted downstream the choke bean where the flow throttling effects happen.


Check Valves:

Sizes 2’’, 3’’

Type STD/H2S

Connections Weco Unions Fig. 1502

Design Dart and Flapper

BE provide two types of check valves, the dart style and the flapper style. Both styles offer equal performances. The flapper style offers less resistance to the flow, as it does not obstruct the line as the dart style. Each style presents specific advantages depending on the application (acidizing, frac…).


Tees, x-overs, laterals, elbows:

Sizes 2’’, 3’’, 4’’

Type STD/H2S

Connections Weco Unions Fig. 206, 602,1002, 1502

BE offers a wide choice of fittings with various configurations such as:

Crosses

Tees

Short radius elbows

Long radius elbows

Laterals

Wyes

Xovers


Pup Joints:

Sizes 2’’, 3’’, 4’’, 5’’, 6’’

Type INTEGRAL/NPS/WELDED/LPT/STD/H2S

Connections Weco Unions, Fig. 206, 602, 1002, 1502, Flanges, Clamp, Hubs,…

Length Depends on customers requirements

The pup joints manufactured and offered by MSI FZC are of different constructions to match the requirements of the clients. They can be integral, or NPST (Non Pressure Seal Thread), LPT(Line Pipe Thread) or welded. The integral construction is usually the preferred one in cementing/ stimulation operations while the welded construction is very popular in well testing operations


Swivel Joints:

Sizes 2’’, 3’’, 4’’

Type STD/H2S

Style S10/S20/S30/S40/S50/S60/S70/S80/S100

Connections Weco Unions, Fig. 1502, 1002, 602

The BE swivel joints use the tri-race design whereby the rotating feature is obtained by three races of ball bearing. These are fully interchangeable with the other main brands available on the market.


Loops:

Sizes 2’’, 3’’, 4’’

Type STD/H2S

Construction Integral, NPST

The loops are all made with one swivel Style 10 and one swivel Style 50. The length of the NPST loops goes up to 20ft and the length of the integral loops goes up to 12ft.

Api 6a gate valves:

Sizes 1-13/16”, 2-1/16”, 2-9/16”, 3-1/8”, 3-1/16”, 4-1/16”, 5-1/8”, 7-1/16”

Pressures 3 000 PSI to 15 000 PSI

Material Class All API 6A material classes

Temperature Range All API 6A temperature ranges

PSL 1 to 3 including 3G

PR 1 and 2


Drilling Choke

Sizes 2-9/16”, 3-1/8”, 3-1/16”

Pressures 5 000 PSI to 20 000 PSI

Material Class All API 6A material classes

Temperature Range All API 6A temperature ranges

PSL 1 to 3 including 3G


Drilling Manifolds:

Sizes 2-1/16’’, 2-9/16’’, 3-1/8’’, 3-1/16’’, 4-1/16’’, 5-1/8’’

Pressures (Working) 3 000 PSI, 5 000 PSI, 10 000 PSI, 15 000 PSI, 20 000 PSI

Valves API 6A gate valves, slab type, non rising stem

Actuation Manual, Pneumatic, Hydraulic

Choke Valves API 6A/API 16C Cameron H2 style (Manual), Swaco style (Hydraulic)

Inlet/Outlet Connections 2’’ WECO 1502 Female/Male, 3’’ WECO 1502 Female/Male, Grayloc, Techlok, API Clamp Hub,…

 

BE builds all manifolds for drilling operations:

Choke manifolds

Kill manifolds

Mud manifolds

Cement manifolds

Standpipe

Configuration and specifications are as per client’s requirements.

Centrifugal Pump:

Various sizes of centrifugal pumps are kept in stock including the popular 6”x5”x11” and 5”x4”x11”. The Gardner Denver pumps are lighter and more compact than the competitor’s pumps and therefore make them a better choice for integration in systems where space and weight are critical such as  ementing/stimulation/frac units. The Gardner Denver pump are field proven since many years and are liked for their reliability, long life and easy maintenance. They are the perfect choice for oilfield operations.


Butterfly Valves:

BE provide wafer type butterfly valves from 1” to 8”. The valves are available either as manually operated (handle) or pneumatic actuated.
The bodies are forged. Stems and discs are made of stainless steel.
For acid applications Teflon seals and Teflon coated disc version is available.


Needle Valves:

BE manufactures ½” NPT needle valves in Stainless Steel 304 rated 10 000 PSI working pressure and suitable for H2S applications.
These needle valves are ideal as sampling valves and isolation valves for instruments.


Choke Beans:

BE provide Big John type choke beans. The housing is made of Stainless Steel 410 and the insert is made of Tungsten Carbide.
The insert remains in place in the housing by silver soldering.
The complete choke bean is 6” long.
Orifice sizes available go from 2/64” to 128/64”.
Choke bean wrench also available.


Thermo Well:

BE offers integral thermowells, stainless steel made, ½” NPT MxF in various stem lengths.
The are rated 10 000 PSI working pressure and are suitable for H2S applications.

These are widely used in data headers and on studded blocks for well testing choke manifolds.


Lubricants and Grease gun:

BE offers a complete range of greases for Oilfield valves.
Specific greases are available for each type of valve and working conditions:

Valves: Gate valves, ball valves, plug valves

Application: Oilfield / Pipeline / Production

Environment: desert, arctic

Media: crude oil, CO2, H2S, sea water

A wide offering of grease guns (manual, air operated, electric) are also available for different sizes and packaging of lubricant (sticks, cartridges, drums…).
In addition, numerous types of grease fittings are also available.
Solvents, also called “flush” are also offered. They are used to clean the valves and remove any trace of grease, oil, and other contaminant.

BE takes into high consideration the value of repairing. It means to ensure prompt assistance in case of need: the quick repair and refurbishment makes the equipment operate again. A way to gain time, go on with the task, rather than scrap it and wait for a new one. BE solves the problem, planning and settling the intervention, according to customer needs.

PRODUCTS

icon

CHEMICALS

We supply a thorough product portfolio for the oilfield chemical industry

icon

SPARE PARTS (Fluid Ends & Spare Parts)

BE developed many types of spare parts either for conventional fluids or corrosive
listing them in our inventory too

icon

CASING HARDWARE EQUIPMENT

BE provides equipment to achieve placement and cementation of the casing string